Description
Icom IC-9700 VHF/UHF All Mode Transceiver
System Overview
The Icom IC-9700 is an all-mode Tri-band transceiver, covering 2 m, 70 cm, and 23 cm.
In addition to the traditional SSB, AM, FM, CW, and RTTY modes, the transceiver also incorporates D-STAR (Digital Smart Technology for Amateur Radio) DV and DD modes.
A full-featured Satellite mode is built-in! There are three antenna connectors, one each for 144, 430/440, and 1200 MHz. 144, 430/440, and 1200 MHz All Mode Transceiver Including Satellite, DV, and DD Modes.
Functions
The Icom’s Digital Expertise
RF Direct Sampling, for 144 MHz and 430/440 MHz, is utilized in the IC-9700. For 1200 MHz, the Down Conversion IF Sampling method is adopted.
In this system, signals are digitized by the ADC and processed in the FPGA. The signals are processed in the digital domain, thus eliminating distortion and other nonlinear elements seen in the legacy superheterodyne receivers. The outcome is that the signal purity is very high, and clear audio can be generated.
Intuitive Touch Screen Display
The beautifully designed MENU screens enable you to navigate settings and functions with a simple touch. The expanded menu provides quick access to the Satellite and D-STAR functions.
Additionally, a touch-on-screen keyboard is available for entering alphanumeric memory channel names.
Real-Time Spectrum Scope and Waterfall Display
This is the first time for an Icom VHF/UHF transceiver to have a real-time spectrum scope and waterfall display comparable to an HF high-tier transceiver.
With the high-speed spectrum scope, you can instantly see the operating band condition.
With a simple touch of the scope, you can tune the radio to the desired signal frequency. You can also view the received signal history using the waterfall display.
Independent Receiver, Full Duplex Operation
The IC-9700 can simultaneously receive on two different bands and two different modes. For example, you can receive on the 1200 MHz band in the SSB mode while receiving on the 144 MHz band in the FM mode.
This function can be a significant advantage when participating in contests or searching for weak signals. Furthermore, the IC-9700 is a Full Duplex, which enables you to transmit on the main band while receiving on the subband.
Audio Scope Function
Making good use of the Audio Scope function, various audio characteristics, such as microphone compressor level, filter width, notch filter width, and keying waveform in the CW mode can be monitored.
Transmit or receive audio can either be displayed on the FFT scope and the oscilloscope.
Newly Designed Power Amplifier
The power amplifier outputs stable power with high efficiency (144/430 MHz band: 100/75 watts). The cooling system prevents the PA from overheating, even when operating for a long time.
That ensures reliable operation during contests. This amplifier is more energy efficient than previous models.
D-STAR Operation Friendly Functions
The IC-9700 has the D-STAR Repeater (DR) function that has been well received by D-STAR enthusiasts.
The DR function can be used on both the Main and subbands simultaneously to listen to two separate DV signals. Moreover, by using the DD mode, you can browse the Internet through a repeater station.
Built-in DV Gateway features
A static IP address can be set for the transceiver. If a global IP address is specified for the router, the terminal mode or the access point mode can be used without further software.
Almost Identical User Interface to the IC-7300
The layout of the dials and keys, and the menu screens are almost the same as the IC-7300. If you are familiar with the IC-7300, you can operate the IC-9700 without hesitation.
The IC-9700 is the perfect side-by-side companion to the IC-7300, enabling operations from HF to 1200 MHz.
Comprehensive Menus for Satellite Operation
The IC-9700’s Satellite mode makes Satellite operation very easy. Even in the Satellite mode, you can use the high-quality spectrum scope.
Normal and Reverse Tracking Functions
In addition to the Reverse Tracking function, there is also a Normal Tracking function.
Both functions simultaneously increase or decrease both the downlink and uplink frequencies in the same steps.
AFC Function
Automatic Frequency Control follows the frequency change caused by the Doppler effect, thus maintaining a stable receive condition.
Up to 99 Satellite Memory Channels
The IC-9700 has 99 satellite memory channels that enable you to store both uplink and downlink frequencies and operating modes. By selecting a satellite memory channel, all of your satellite settings are completed.
UDP Hole Punch function
The UDP Hole Punch function enables Access Point mode or Terminal mode communication (limited function), even if you cannot forward port 40000, or a Global IP address is not assigned to your device.
This function is convenient when you are using a free Wi-Fi hotspot.
Other functions
- Loud and clear audio
- Compatible with the RS-BA1 Version 2 and CI-V commands
- Built-in server function
- Digital Twin PBT
- CW functions: Full break-in, CW memory keyer, CW reverse, CW auto-tuning
- SD card slot
- TX/RX audio recording
- Screen capture
About Icom
Icom is one of the best manufacturers of wireless communication devices in the world because of their real superiority in the Two-way Radio device market in the Kingdom of Saudi Arabia and in the world in general, in addition to that Scope Systems EST is one of the authorized agents as a supplier for Icom inside the Kingdom of Saudi Arabia
Icom Corporation is an American telecommunications equipment, software, systems, and services company that is the successor to Motorola Corporation, after splitting from its mobile division into Motorola Mobility in 2011. The company is headquartered in Chicago, Illinois.
Important links:
How to use handheld radios and overcome most of the problems
Go to the store.
Reviews
There are no reviews yet.